2024 LAUNCH CRP919E PRO Elite Bidirectional Car Diagnostic Scanner Key Coding US

  
LAUNCH OBD2 Scanner Diagnostic Tool, Pro-level CRP919E Scan Tool, CANFD DoIP Car Scanner, 31+ Reset Functions, All System Diagnostic Scanner, Upgraded of CRP909E &CRP909X(Add More Function & New Hardware) Now promotion - LAUNCH has negotiated to make this 2 years for FREE instead of the standard 1 year!! LAUNCH OBD2 Scanner Diagnostic Tool, Pro-level CRP919E Scan Tool, CANFD DoIP Car Scanner, 31 + Reset Functions, All System Diagnostic Scanner, Upgraded of CRP909E &CRP909X (Add More Function & New Hardware). Now promotion - LAUNCH has negotiated to make this 2 years for FREE instead of the standard 1 year!! LAUNCH CRP919E Support full-system diagnosis function: including Read and delete fault codes, read freeze frame, Read vehicle information, Active Test and Reset Service.. Electronic Parking Brake Reset, 3. Battery Maintenance System Reset, 9.9 Diesel Particulate Filter (DPF) Regeneration, 10. Electronic Throttle Position Reset, 11. AFS (Adaptive Front-lighting System) Reset, 13. AdBlue Reset (Diesel Engine Exhaust Gas Filter), 20. High Voltage Battery Detection, 23. Intelligent Cruise Control System Reset, 29. Auto VIN Scan + Active Test (Bi-Directional Control).

Support full OBD function 5. Support automatic generation of diagnostic report and upload 6. 7 inch touch screen & Keypad input, 3GB RAM + 32GB ROM. Support multiple languages: English, French, Italian, Japanese, Spanish, German, Russian, Portuguese, Korean, Traditional Chinese, Polish.

30+ Reset Service Function, keep creasing. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. When due to the tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced and tire pressure sensor is damaged, The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection. It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration. To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement. Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. Enables you to perform resetting operation on the monitoring unit of battery, in which the original low battery fault information will be cleared.

Specially works for Diesel Particulate Filter system with DPF. This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is clean or replaced. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.

If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU. This function is used to set the size parameters of the modified or replaced tire. This feature is designed to perform door window matching to recover ECU initial memory. This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support).

AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost. After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.

This function enables you to initialize the adaptive headlamp system. This function is applied to set or learn air/fuel rate parameters.

This function enables you to complete the gearbox self-learning to improve gear shifting quality. Use this function to activate the electronic water pump before venting the cooling system. To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal. This function is applied to match the seats with memory function that are replaced and repaired. This function is used for high voltage battery diagnosis and status information detection. This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car, etc.

This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder. This function is used to change system language of vehicle center console. Note: Available maintenance functions vary depending on the vehicle make, year, and model.

CAN-FD Protocol (CAN with Flexible Data-Rate). Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience. The following vehicle models meet -ISO 11898-1:2015(CAN-FD) protocol.

Supports -ISO 13400(DoIP) Protocol. It has high bandwidth and a faster data rate, which is suitable for transmission of a large amount of data, and greatly improves the communication speed, which can work better with OBD diagnosis. Compatible with E and F Chassis BMW and new cars from Land Rover/Jaguar vehicles (about manufactured after approximately 2020). Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls. OE- Level Full System Diagnosis. As an OE level automotive diagnostic tool, LAUNCH CRP919E can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information and perform active tests, matching, adaptation, turn off warning lights, reset monitors.

Full range car models and full car system diagnose make it a professional automotive diagnostic tool. Include : ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System , Air Conditioning System, Transmission System, etc..

Brief introduction of its capabilities in full systems diagnostic as follows. For Engine System: help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission. For Transmission: It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing. For ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.

For SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status. To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation. To diagnose Emission System if the system is affected by vehicle age or poor quality fuel.

A good emission system reduces harmful gases to a large degree and protects you from being fined. To diagnose Fuel system if vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions. To diagnose Transmission if your car is slipping or difficult to shift.

The system plays an important part in the overall performance of your car. To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can't see clearly.

10:To diagnose Light System if you see rapid signal blinking or dimming lights. Over 70 Car Brands, 10000+ Models. For Abarth, For Accura, For Alfa Remeo, For Audi, For BMW, For Bugatti, For Buick, For Cadillac, For Chevrolet, For Chrysler, For Citoren, For Dacia, For Daewoo, For Daihatsu, For Dodge, For Eurford, For Fiat, For Ford, For GM, For Gmsa, For Honda, For Hyundai, For Ifiniti, For Isuzu, For Jaguar, For Jeep, For Kia, For Lancia, For Landrover, For Lexus, For Lincoln, For Mahindra(Indian), For Maruti(Indian), For Maserati, For Mazda, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Nissangtr, For Opel, For Peugeot, For Porsche, For Renault, For Renault Samsung, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata(Indian), For Tlisuzu, For Toyota, For Vauxhall, For Volvo, For VW, For VAZ. Operating System:Android 5.0.

OBDII input voltage range: 918V. DC 5V charging cable & power adaptor or.

Diagnostic cable through connection to vehicle's DLC. Dimension: 251.4mm x 150.6mm x 40.4mm. Working temperature: -10 to 50°C (14 to 122 F°). Storage temperature: -20 to 70°C (-4 to 158 F°). OBD II Diagnostic Cable x 1. DC 5V Charging Cable x 1. US Plug Adapter x1;EU Plug Adapter x1;UK Plug Adapter x1. Multilingual Quick Start Guide x 1.