JBL Stage A6004 560 Watt 4-Channel Class-D Amplifier

  
Product SKU: 145731 ID: stagea6004am. 560W Max (240W RMS) 4-Channel Class-D Amplifier w/ Remote Level Control. Class-D Full Range 4-Ohm Stable 4-Channel Amplifier. 4 ohms: 60 watts x 4 chan. 2 ohms: 70 watts x 4 chan. Bridged, 4 ohms: 140 watts x 2 chan.

Total power output: 560 watts. Pulse Width Modulated MOSFET power supply. Wired remote bass level control included.

LED power (green) and protect (red) indicators. Preamp RCA outputs to daisy chain multiple amps. 3-way protection circuitry (thermal, overload, and speaker short protection). Dual speaker terminals simplify the hookup of multiple speakers.

Heavy duty aluminum alloy heat-sink. Frequency Response: 20 - 20000 Hz. Signal to Noise Ratio: >75 dB.

Variable high-pass filter: 32 - 320 Hz, 24 dB/octave. Variable low-pass filter: 32 - 320 Hz, 24 dB/octave. Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz. 4 gauge power and ground wiring is recommended for installation. Dimensions: 6" W x 7.25" L x 2 H.

Power Specifications - Full Range Channels. THD at Rated RMS Power. Low-Pass (LP) High-Pass (HP) Full (AP).

What is in the box? Amplifier Mounting screws (4) Two spare fuses. Black Handle Stainless Steel Utility Knife. NVX Black Handle Stainless Steel Utility Knife. Adding an Amp to Your Factory Stereo?

31-Band DSP that Retains Factory Features and Integrates Your New Amp with a Simple Plug-n-Play Harness. Bypass the factory OEM amplifier when replacing your factory radio or amplifier with an aftermarket radio or amp.

Install Your Amp Without Cutting Factory Wiring. Simplify adding an aftermarket amplifier without modifying your vehicle's original wiring.

Bypass Your Factory Amp and Add a New Aftermarket Amp. Vehicle-specific harness to bypass the factory amplifier. Get the wires you need to properly install and power your car amp.

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire. 4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire. 4 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire. 4 Gauge Power Amplifier Installation Kit. Control the volume level of your bass and amplifier from the front of the vehicle.

Universal Remote Bass Level Control Knob. Flush Mount & Universal via RCA. Works with any amp, controls your bass output.

Want to integrate this amplifier into your vehicle, but you don't want to remove the factory stereo? An LOC (Line Out Converter) will help you do exactly that! Keep the factory look and still get the performance you are looking for. 4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control.

The XLOC44X helps you easily integrate with your factory or aftermarket system. You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology. NVX XIV45 4-Channel RCA Audio Interconnect Cable. 5 Meters 16.4 ft.

4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology. NVX XIX45 X-Series RCA Interconnect Cable. Of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology. NVX V-Series RCA Interconnect Cable. Of 4-Channel RCA cable with dual twisted-pair conductors. Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance.

Of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire. 200 Amp Relay Isolator (BIR200). Great for isolating a second batter making it dedicated to the stereo system. 500 Amp Relay Isolator (BIR500). Does not create a voltage drop to the second battery like conventional isolators.

80 Amp Relay Isolator (BIR80). 80 Amp Smart Relay Isolator (XSBI80). Smart isolator - Monitors and auto-charging feature! 200 Amp Smart Relay Isolator (XSBI200). 500 Amp Smart Relay Isolator (XSBI500). Capacitors store energy for the amplifier to use on demand, thereby assisting in the elimination of dimming lights during peak power surges during use. True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block. 1.0 Farad Capacitor with Digital Red Display for up to 1000W Max. Belva Nine Function Digital Multimeter. Perfect for any installation and troubleshooting.

Impedance Meter / Signal Generator. Set your gains like a Pro, accurately and quickly. This is a must have! Set your crossover frequency like a Pro.

Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal. Make installation a breeze with the XBTU. Accepts 4 gauge or 8-gauge wire. ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output. No-fail termination and current flow, it helps keep your system protected and running smoothly.

High Quality Element Resistant AGU Fuse Holder. Belva BAGUH2 AGU Fuse Holder. 4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder. 4/8 Gauge AGU Fuse Holder. 4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder. Modular Linkable ANL Fuse Block. 4 Pack of 80 Amp Nickel-Plated MANL Fuse. Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses. 4 Pack of 100 Amp Nickel-Plated MANL Fuse. Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses. 4 Pack of 150 Amp Nickel-Plated MANL Fuse. Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses. 2 Pack of 100 Amp Nickel-Plated ANL Fuse. ANL 100A Nickel plated for better power transfer. 2 Pack of 200 Amp Nickel-Plated ANL Fuse. High quality 200 Amp ANL Fuses. 2 Pack of 300 Amp Nickel-Plated ANL Fuse. High quality 300 Amp ANL Fuses. Gauge Reducer, 4 Gauge Input to 8 Gauge Pin. Great for amplifiers that do not accept a large gauge power wire. Pair of 4 Gauge Spade Terminals, #8 Opening. Spade Terminals ⢠4 Gauge ⢠1 Red & 1 Black ⢠Nickel Plated.

4 Gauge Ring Terminals with 3/8 Opening (5 Pieces). 5 Pack of Black 4 Gauge Ring Terminals.

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing. Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob. Marine Grade Bluetooth Audio Controller/Receiver. Policies for US and Canadian Customers. Return for replacement within: 30 days.

Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse.

Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility.

You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number.

Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.

Prices, specifications, and images are subject to change without notice.