LAUNCH X431 CRP919E BT PRO Elite Bidirectional Car Diagnostic Scanner Key Coding

  
LAUNCH X431 CRP919E BT Car OBD2 Scanners Diagnostic Tools Full System ECU Coding. ALL IN ONE LAUNCH CRP919E BT BIDIRECTIONAL SCAN TOOL WITH ALL SYSTEM DIAGNOSTIC & 31+ RESETS. LAUNCH CRP919E BT, 2024 NEW RELEASED SCAN TOOL. ABOUT LAUNCH: LAUNCH is the global market share of automotive diagnostic tools is the first! Focusing on automotive scanners for 26 years, it has more than 1000 international patents. Have you ever been bothered by these problems. The device is always unable to scan the required system. The reset functions of your diagnostic scanners are not enough. Limited vehicle compatibility of your automotive scan tools cannot cover more business.

The scanner with active control in the market is too expensive. LAUNCH CRP919E BT OBD2 scanner can drive your trouble away!

All in all, if you are considering to get an all-in-one diagnostic tool with limited budget, LAUNCH CRP919E BT is the FIRST and the BEST. This CRP919E BT OBD2 Scanner.

Supports All systems Diagnoses, All OBD-II Functions, 31+ Reset Functions, Bidirectional Control, CANFD&DOIP, FCA Autoauth, ECU Coding, Key Programming, PMI Function(Programmable Module Installation), ECU Configurations, Newly Added Camera Function, 2 Years Update Included!! Android 10.0 OS, 4-Core Processor, 4G/64G Memory(128GB Extended), 6300mAh Battery, 7 Touch Screen. CRP919E BT has better hardware configurations, wider vehicle coverage, and longer battery life than CRP909E. CRP919E BT is a cost-worthy all in one diagnostic OBD2 scan tool.

We changed from 29 RESET FUNCTION to 31 RESET FUNCTION in September 21st 2022 on CRP919E BT, which meet your need in the most degree. And CRP919E BT is 5 more rest function than crp909E. We provide OE-level ECU coding on CRP919E BT, you can get it by upgrading software module in APK. It allows you to reset the adaptive data, match the replaced ECUs, unfold the hidden functions, etc. Recently Released Software Update: PORCHE(V24.05).

New Functions: 1 For Cayenne-9YA (asof2018) added the low-temperature circuit bleeding and A/C compressor running-in functions for the thermal management system and the valve servo motor setting / checking and A/C compressor setting functions for the A/C system. 2 For Panamera (971), added the low-temperature circuit bleeding and A/C compressor running-in functions for the thermal management system and the valve servo motor setting / checking and A/C compressor setting functions for the A/C system. 3 For Taycan added cooling circuit emptying and filling cooling circuit bleeding andA/C compressor running-in functions for the thermal management system and the valve servo motor setting/checking function for the A/C system. Recently Released Software Update: FIAT(V37.20). Recently Released Software Update: Maserati(V11.55).

New Functions: Added 2021 GHIBLI engine system special functions, ECM engine oil reset and engine oil level initialization. PROFESSIONAL ALL SYSTEM DIAGNOSTIC SCANNER-ONE IS ENOUGH.

LAUNCH SCANNER CRP919E BT SAME AS SNAP-ON SCANNERS, POWERFUL OE FULL SYSTEM SCAN TOOL WITH ECU CODING. The LAUNCH CRP919E BT auto code reader is a cost-effective automotive scanner, that offers OE-level diagnoses on all available electronic systems, which can read/clear codes, data stream, read control module information for ECM, ABS, SRS, TCM, EPB, TPMS, SAS, A/C, BMS, ESP systems, etc. It supports OBD ll functions to help you turn off the annoying instrument fault indicator and also can read/clear codes, O2 sensor test, I/M readiness, On-board monitor test, read data stream, display freeze frame data, EVAP system test, retrieve vehicle information (VIN, calibration ID, calibration verification numbers). Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/Self Leveling Suspension systems Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System Stabilizer/Intelligent Parking Assist/Door Motors/Audio systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/DP. F Reset Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Reset / Sliding Doors / Electronic Throttle Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics...

2024 LAUNCH CRP919E BT snap on scanner has the ECU coding function which only the advanced tool have. Recode Changed Modules, Optimize Vehicle Performance, Re-Flash Hidden Functions, Renew ECUs Coordination, Reprogram Adaptive Data, Improve Fuel Efficiency, Reduce Power Loss, Improve the Durability of Mechanical Parts. Compatible with B-MW, A-udi, VW, Skoda, etc. Rematch the repaired or changed component control modules. Activating daytime running lights, activating the acoustic warning signal, changing the brightness of the dashboard, adjusting interior lights, automatically activating the rear-view camera, adjusting the level of the side mirrors etc. Disable some unneeded functions: such as deactivating injector buzz sounds, deactivating the auto start-stop, disabling seat-belt warning and more. Online Coding&Online Programming is not available. Coding function varies by vehicle model. 2024 LAUNCH CRP919E BT automotive tools mechanics has the PMI Function allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

Compatible with B-MW, Ford, Mazda, A-udi, Skoda, etc. 2024 MOST COST-EFFECTIVE BI-DIRECTIONAL SCANNER-SAVING A LOT FOR YOU! 31+ RESET FUNCTIONS ADAPTATION/CALIBRATION/ INITIALIZATION: MEETING MORE CUSTOMER'S NEEDS. The LAUNCH CRP919E BT code reader car diagnostic tool with reset is one of popular OBD2 automotive diagnostic scanners in the market, The following 31+ special functions are frequently-used car services which can meet your more requirements and cover more car models. 5 Newly Added Functions Than CRP909E: EG.

R Reset / Power Balance / High Voltage Battery Diagnostic/Intelligent Cruise Control/G. F (Gas Particular Filter)Regeneration etc. OIL RESET, BRAKE RESET, ABS BLEEDING RESET, WINDOW CALIBRATION RESET, CRANKSHAFT/CAMSHAFT RELEARN, AFS HEADLAMP RESET, LANGUAGE RESET, SEAT RESET, STOPSTART RESET, BMS RESET, INJEC RESET, TPMS RESET, IMMO RESET, TRANSPORT RESET, COOLANT RESET, NOXSENSOR RESET, TYRE RESET, GEAR RESET, ADBLUE RESET, DP. F RESET, THROTTLE ADAPTION, SAS RESET, AIRFUEL RESET, ACINI RESET, GEARBOX RESET, SUNROOF RESET, SUS RESET. 6 Hot Repair Functions Explanations.

Oil Reset Service (for 66 brands). Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

ABS Bleeding (for 48 brands). Air will get inside the brake system after replace components such as calipers, wheel cylinders. The air has to be removed by bleeding the brakes to keep a firm brake pedal. Note: This function only support the vehicles that can do AUTO bleeding.

EPB Electronic Park Brake Reset(for 58 brands). It is important in the maintenance of electronic braking system's safety and efficiency. BAT battery service (for 35 brands). Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. F Diesel Particulate Filter Reset(for 62 brands).

Specially works for Diesel Particulate Filter system with DP. F component replacement teach-in and DP.

F teach-in after replacing the engine control unit. TPMS Tire Pressure Monitoring System Reset (for 88 brands). Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors. Replace Airbag ECU (for 20 brands). It can replace Airbag ECU module which helps to match the new airbag information with the ECU after you repaired the airbag and let it know the fault has been repaired.

Note: It will not support the airbag crash data cleaning. It needs to be done after the engine has replaced the ECU and disassembled or replaced the timing belt assembly and crankshaft position sensor. Wide Coverage: for GMC, Benz, Chrysler, Jeep, Dodge, Buick, Cadillac, Chevrolet, Honda, ISUZU, ACURA, VOLVO, Opel and moreKeep Growing in the Future!!! CRP919E BT's reset function is the same with Launch X431 V, so except for the commonly 31 Rest functions in the "Reset" menu, you will Get 100+ Reset Functions if you diagnose by the car brands. "Diagnose" > select vehicle brand > Automatically Search > System Selection>Select System >Special Function.

Note: the special functions that can be performed may vary by car model. POWERFUL PERFORMANCE, ADVANCED FUNCTION, SPEND LESS MONRY TO GET THIS! EXCELLENT NEW FEATURE: FULL BI-DIRECTIONAL CONTROL/ACTIVE TEST. The LAUNCH CRP919E BT car diagnostic tool features with.

Full Bi-directional control is newly released which is advantageous among basic code readers. This can drive solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls, let you quickly understand whether a specific system, component, or subsystem is operating normally, it enables to accurately and pinpoint issues and greatly improve diagnostic efficiency. EVAP Vent / Purge Solenoid. Window/Light/Door Lock Actuators/Headlamp Test/Sunroof/Operate mirrors/Turn on the sound horn. And also can perform other actuation test functions including Modulate the throttle, Turn Off ACC Lane Keeping Assist System (LKAS) ; Turn ON/OFF Front and Rear side ACM Solenoid, Left clutch electromagnetic coil test, Acceleration Device Test, Oil Pressure Control Test DYNAMIC camera aiming, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, PARKING BRAKE tests, etc. Note: Please "Upgrade Software" to get "active test". Actuation test functions vary by the vehicle system.

WIDE VEHIVLE COVERAGE WITH NO IP LIMITED! With the newly update on Launch scan tool CRP919E BT, you now have access to the security gateway module on 2017 and newer Fiat Chrysler Jeep Dodge vehicles. Note:FCA autoauth requires a paid FCA account to log in directly.

If the login fails, you can choose to connect to 12+8 FCA adapter to solve your problem. Compatible with a Wide Range of Vehicles.

Compatible with J1850 PWM, CAN, ISO9141, J1850 VPW & KWP2000 protocols, made after 1996 in the US, 2000 in EU, and 2008 in Asia. Much commonly-seen car brands in the U. Like GM, Toyota, Honda, Chevrolet, Ford, Benz, BMW, Audi, Renault, Land Rover, Volvo, Chrysler, Jaguar, Kia, Hyundai, Nissan. Support CAN FD/ DOIP Diagnostic Protocols: Compatible with GM models (2020 and later).

DoIP makes LAUNCH CRP919E BT save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later). More Details of Car Brands.

Compatible with Chevrolet, Buick, Cadillac, Chrysler, Dodge, Ford, GMC, etc. Compatible with Infiniti, Acura, Kia, Lexus, Hyundai, Subaru, Daewoo, Daihatsu, Mitsubishi, Honda, Mazda, Suzuki, Toyota, etc. Compatible with BMW, Benz, Audi, Porsche, Abarth, Alfa Romeo, Bugatti, Citroen, Dacia, Volvo, VW, Land Rover, Opel, Peugeot, Renault, Fiat, Jaguar, Lancia, Mini, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, etc.

NOTICE: Kindly send your VIN to check compatibility as the function vary on cars. Menu varies by vehicle's make, model, and year! LAUNCH X431 CRP919E BT SCANNER: MORE FUNCTIONS WAITING FOR YOU TO SEE! EXTRA FEATURES PROVIDE MORE FASTER SERVICES, MORE SMATER. IMMO Function: LAUNCH CRP919E BT launch scan tool has the immo function which is similar to x431 V's anti-theft key car model.

It can add a new key and disable the lost car keys, but only covers some 3.5th gen. Volkswagen, Audi, Skoda, Seat, and some Asian cars. 4 in 1 Live Data Stream.

The scan tool CRP919E BT launch scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter. Is convenient, customer can record the live data stream for up to 4, simultaneous, PID's. Once these have been recorded they can be played back in text format and/or graph format.

Supports two graphs (independent) or 4 PID's graphed (combined). Playback timeline can be scrolled, paused, viewed, etc. There's quite a bit of power in the graphing. Launch CRP919E BT obd2 scanner support auto generate and store vehicle diagnostic report which can let your mechanic know how to do vehicle inspection and maintenance.

The diagnostic report can help you save time to analyze the problem, it is very great for repair shop, mechanics can print out the vehicle report for customer. Displays Error Codes With Explanations. It will switch to Google to show you more analysis of trouble codes, reasons why such faults occur, and even YouTube links. With Repair Info & Tips in Scan Tool.

The training videos/The repair tips for improvements. MULTI LANGUAGES TO SUPPORT YOUR NEED. The CRP919E BT with Android 10.0 System +7'' Touch Screen+11 Languages+Dual Operation Methods : Touch screen and Keyboard button, make the diagnoses process more easy.

Built-in newest android system Android 10.0 System make it work more smart more quickly. Based on a resolution of 1024600 pixels 7-inch touchscreen, easy to find the. Functions you need and understand the diagnosis results. The LAUNCH CRP919E BT scanner comes with muti languages English, Spanish, Portuguese, Russian, German, Italian, Korean, French, Japanese, Polish, Traditional Chinese which can meet different demand.

Note: Kindly send us the S/N of the device to change the languages. This scanner fits for technician, mechanic, advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, weekend DIY, individual.