Water Level Probe for our # F13174 MODELS. The Water Level Probe is designed to mount into an open cell, EPDM rubber roof. The probe will act as a water level indicator and control system. It will sense the outside air temperature and turn on the roof heat when the temperature goes below the programmed limit of 38 degrees F. The heated liquid in the sensor will expand causing the probe to rise up approximately 3/16" - 1/4".The probe is set at 12 degrees F and can be adjusted up or down with a minimum of 1/2 rise per degree F change in temperature. When there is no liquid in the sensor, it sits at. Happy camper-both you and your grill. Let MARKET FORGET make grilling easier with the F13174 T Water Level Control Probe. It's just one of many extras we pack into every MARKET FORGET appliance we make.
The Water Level Control Probe is an accessory designed to be used with the MARKET FORGE F13174 and F13772 walk in freezer/rethermalizers. The Water Level Control Probe accessory allows the operator to monitor water levels in the heat exchanger of the walk in freezer/rethermalizer. The Market Forge F13174 Water Level Control Probe is used on Boilers with closed Top and Open bottom. This probe gives you the ability to control water levels through the use of a dedicated input valve.
The F13174 Water Level Control Probe is used to monitor the water level in boilers, hot water tanks, heater vessels, and other similar equipment. The probe can be mounted either vertically or horizontally. The Water Level Control Probe monitors the water level in your pool and turns your automatic cleaner on and off depending on the water height. This item is in the category "Everything Else\Every Other Thing".The seller is "zappy_sales" and is located in this country: US. This item can be shipped to United States.