Speedway Motors Fuel Gauge Interface Module for Original Sender to Any Gauge

  

Allows you to use your existing fuel sending unit with any fuel gauge, 12 volt negative ground systems only, Simply wires in-line between your fuel gauge and sender, no need to drop the fuel tank and change sending units, Mounting holes provided and must be mounted inside of vehicle away from moisture, dirt and high heat, Complete installation instructions included, knowledge of automotive wiring preferred. Speedway Fuel Level Gauge Sending Unit Interface Module.

Some increase resistance from Empty to Full, while others decrease as the level goes up. For a builder updating their vehicle with new gauges, this presents a problem in that the aftermarket gauges must match the sending unit located in the tank. This module will allow you to use your stock sender with any fuel gauge. You no longer have to remove the tank to add a separate sending unit or modify the sending unit that comes with a aftermarket gauge set.

Simply wires in-line between your gauge and existing sender. Allows you to use your stock sender with any fuel gauge.

No need to remove the tank to add a separate sending unit. 12 Volt-Negative Ground application only. Learn more about selecting the proper fuel sending unit by reading our tech article. You must select your fuel sending unit type and perform the fuel gauge calibration.

If both of these steps are not performed, the interface module will not work properly. Please read the manual before starting installation. Being familiar with the installation steps will eliminate errors in wire connections.

Mount this unit in an area free of moisture, dirt and high heat. THIS UNIT IS NOT WATER TIGHT.

Recommended installation area is under dash using installer fabricated brackets. DO NOT DRILL HOLES THROUGH THE BOX/UNIT. Great Product easy to install. By Box on February 15, 2022. It worked great for a fuel cell that I had to calibrate to a factory Ford gauge.

Yes, I recommend this product. By Will the Mechanic on November 11, 2021. Great product, Speedway really delivers on this item. I could not find these in my locality so I knew I'd have to order online.

Speedway had a great price on this and the item came with instructions for wiring (thank you). Additionally Speedway's video on the part install process and general highlights of the item helped me make a more informed decision. By Jlculpepper79 on July 19, 2021.

I would recommend this product. By TS on July 10, 2021. This unit is a fantastic was able to use a old fuel gauge with a modern day sending unit, saved me a lot of headaches great product. Nice to have an interface between fuel gauge and sender unit. By Tim on June 17, 2021.

This product allows me to have a fuel gauge by 53 F100. 1953 fuel gauge to a 1970 sender unit. Related Items / Suggested Parts. Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8-1/2 Inch. Classic Instruments VT09GLF Vintage Fuel Level Gauge. Classic Instruments CW09SLF-D Classic Fuel Level Gauge. Stewart Warner 82303 Deluxe 2-1/16 In Elec Fuel Level Gauge-240/33 Ohm. AutoMeter 1317 Arctic White Air-Core Fuel Level Gauge.

Stewart Warner 385B-F L Swing 6-12 Fuel Level Sending Unit 240/33 Ohm. Stewart Warner 385C-F R Swing 6-12 Fuel Level Sending Unit, 240/33 Ohm. Stewart Warner 391A-F L Swing 10-15 Fuel Level Sending Unit-240/33 Ohm. Stewart Warner 391B-F R Swing 10-15 Fuel Level Sending Unit-240/33 Ohm.

Stewart Warner 82211 Standard Fuel Level Gauge, Electric, 2-1/16 Inch. Stewart Warner 82472 Wings Fuel Level Gauge, Black.

11 Inch Fuel Cell Fuel Level Sending Unit, 240-33 Ohm. Please take advantage of the "add to cart" button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice.

Speedway accepts full responsibility for the accuracy of our listings and product representation. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Additional Fuel Injection Parts".

The seller is "speedway_motors" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

• Brand: Speedway Motors
• Type: Fuel Level Control Units
• Manufacturer Part Number: 91012910
• Item Length: 6.000