Degree Grade Control

Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD

Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD

Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD    Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD

Superlift's Level-It lift systems are the perfect solution for anyone wanting an economical and easy way to eliminate the factory nose-down rake on virtually all late-model trucks and SUVs. Whether it's simply leveling the truck's stance, making the room to go up a couple of tire sizes, or plus-sizing the tire and wheel package on the vehicle, Level-It components work with factory suspension components to achieve modest ride height gains Super-EZ install. Front tires attach to steering knuckles. The knuckles pivot on ball joints attach to upper & lower control arms. The upper & lower control arms position the knuckles front-to-back & side-to-side.

The spring of the suspension is a torsion bar. The front of the torsion bar attaches to the lower control arm and rear attaches at a rear frame crossmember. This crossmember houses the adjuster or torsion keys. The torsion bars have a tremendous pre-load or twist in them. The torsion bars are what determine the ride height of the suspension.

These torsion bars have a certain amount of adjustment built into the factory system. Torsion bar keys have hex-cut (or splined) holes that mate to the rear ends of the torsion bars. This adjustment takes place via a bolt that indexes on a torsion key attached to each torsion bar. Simply cranking up the factory system is not the right way to go about gaining minor amounts of lift due to a number of factors. Our Level-It keys are indexed differently to increase bar rotation and lift (the center hex where the torsion bar mounts are re-indexed or rotated).

As the new keys are loaded, they apply torsional load to the bars which in turn lifts the vehicle greater than that of the stock torsion keys. Ours are also designed to grab the flat hex portion of the torsion bar for a more precise, tighter fit. SUPERLIFTS heavy-duty forged-steel construction torsion keys are 25% stronger than OEM keys. Provided 1.5 inches to 2.5 inches of adjustable lift height. Hardware is supplied to prevent over-cranking the torsion bars.

Ideal for restoring height lost from the heavy front bumper, winch/bumper combo or snow plow. Included in this system is a set of four (4) Superlift hydraulic shocks absorbers.

Superlift shock absorbers are designed to provide excellent ride quality, durability, and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed. Front: Torsion keys (2); supplied hardware (2); Superlift Shocks (2).

Rear: Rear block kit; cast steel blocks (2); U-bolts (4); heavy-duty flat washers (8); U-bolt long nuts; Superlift Shocks (2). Special torsion bar puller tool is required to load/unload torsion bars.

Images may vary from actual product, Please use images for reference only. Refer to Title and Description for correct application. We value your business and we are not satisfied until you are. Rudy's Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California.

According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy's Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item "Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD" is in sale since Tuesday, November 17, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "rudys_performance_parts" and is located in Chapel Hill, North Carolina.

This item can be shipped to United States.

  • Lift Height: 2 Inch
  • Interchange Part Number: Heavy Duty Upgrade Upgrades Upgraded 
  • California Prop 65 Warning: WARNING Cancer; Birth Defects; and Reproductive Harm
  • Manufacturer Part Number: K1003
  • Included Hardware: Mounting Hardware
  • CA Propostion 65 Message: WARNING Cancer; Birth Defects; and Reproductive Harm www.

  • Placement on Vehicle: Left
  • Brand: Superlift

Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD    Superlift 2 Leveling Lift Kit & Shocks For 1997-2003 Ford F-150 4WD