Water-level Controller Refill Automat Ph Orp Meter Ws1

  

The HL-233 Water-Level-Controller enables you to maintain a constant level of water in your aquarium fully automatically. It has two sensors and 4 different operation modes. The minimum and maximum water level with a sensor and switch on and off a pump with the the relay-steered 230V-240V plug socket.

This enables you a fully automatic operation of water supply from a external water storage tank for your aquarium (also saltwater/seawater aquarium). Sample applications: Automatic refill of evaporated water Avoidance of annoying edges of lime and edges of salt Avoidance of variations in density from sea water aquariums Overflow protection Protection from unlubricated operation of pumps e. G empty storage Fully automatic level control Control of sewage pumps.

Operating mode A-1: Fill/Refill aquarium until desired water level was reached (1 sensor) and protect from unlubricated operation protection of the pump in the storage tank (1 sensor). Operating mode A-2: Fill/Refill aquarium until desired water level was reached (1 sensor). Operating mode B: Empty water until minimum level is reached at two sensors.

Operating mode C: Empty water until minimum water level is reached at one of the two sensors (redundancy). 150 mm x 85 mm x 42 mm. CE-konform EN 50081-1, EN 50082-1.

The item "WATER-LEVEL CONTROLLER REFILL AUTOMAT PH ORP METER WS1" is in sale since Tuesday, April 30, 2019. This item is in the category "Pet Supplies\Fish & Aquarium\Other Fish & Aquarium". The seller is "top-messtechnik" and is located in Neuching.

This item can be shipped worldwide.

• MPN: WS1
• Brand: OCS.